Repairing tape Type B for vinyl only Underwater Tear Aid
TEAR-AID® Repair Patches provide a simple and easy method of patching holes and tears, as well as an excellent protective film solution. Each TEAR-AID® Repair Patch is made from an exceptionally tough, matte finish, abrasion resistant, elastomer that resists puncture and tearing. It is combined with an aggressive adhesive formulated for high bond strength. Tear-Aid expands absorbing force on impact and always returns to original shape and size. This flexibility allows the patch to conform to irregular surfaces without restricting the movement of the repaired material.
Vinyls have oils that are absorbed by most adhesives which causes the adhesive to turn gooey, gummy, and ultimately lose bond. Tear-Aid vinyl repair patches contain an inhibitor that blocks the oils found in vinyls resulting in a long lasting repair.
Sticks, stubs, thorns and horns make holes and tears in your PVC and vinyl gear.
The orange kit does not have the two alcohol prep pads that are provided in the other boxes. The alcohol pads are replaced with a squeegee to help apply the patch directly under the water to create a direct bond with no bubbles. This Type B underwater repair can only be applied to smooth vinyl surfaces
Tear Aid type ‘B’ pack of repair patches suitable for Vinyl and PVC fabrics containing:
1 off – 75mm x 300mm patch
1 off – 35mm x 35mm patch
1 off – 22mm x 22mm patch
1 off – 300mm length of edge reinforcement line
1 off – Instruction set
HOLDS AIR & WATER
under pressure even when stretched
works with all colors
with no sewing
to irregular surfaces
WON’T TURN GUMMY
in high heat
inhibits yellowing for years
to any size with scissors
NO GLUE TUBES
no mess liquid adhesives to apply
that won’t pull off when stretched