Horse Rug Repair Kit
5 g Glue might be dry.
1 x 15g tube of Stormsure Flexible Repair Adhesive
1 x 5g tube of Stormsure Flexible Repair Adhesive
2 x 75mm TUFF Tape Repair Patches
3 x Nylon fabric patches
1 x Disposable gloves
1 x Glue spatula
REPAIRING THE COVER/PROTECTION OF YOUR HORSE
This excellent glue will allow you to effectively and permanently repair holes or tears in your horse’s rug.
Why spend your money on an expensive repair when you can do it yourself for next to nothing.
This glue forms a hard film during the repair, adheres to almost any fabric and when dry remains completely flexible, waterproof and abrasion resistant.
In order to carry out the repair:
Glue a piece of tape to the outside of the cover to keep the two pieces together. Turn the cover over and apply the glue to the tear (inner side). Leave to dry overnight (10 to 12 hours) then remove the adhesive tape.
And voila, you’ve just effectively repaired your cover, without any effort!
You can repair almost anything with Stormsure, whether it’s a small hole or a larger tear.
You can also use this product to repair leaks, holes and tears on waterproof clothing, backpacks, tents, wellington, leather boots, shoes and much more.
When the glue dries, it remains completely flexible and can also be used to fill all kinds of holes effectively.
Once dry, Stormsure glue remains totally soft and flexible.
It is used by many equestrian centres throughout Europe and America.
Stormsure Flexible Repair Adhesive is a very strong general purpose adhesive and it can also be used as a surface sealant. It exhibits special characteristics unlike many adhesives as it is highly flexible and stretchy after it has cured but it remains very strong. It fills gaps well, it is suitable for use indoors and outdoors and in marine environments. The adhesive can be painted on top of a surface to make it waterproof, airtight or abrasion resistant. Stormsure adhesive can often be used to cover holes without a patch. A thick film of adhesive will make a good repair. If the glue will drip through the hole just place some sticky tape behind the hole before applying the glue. It can be removed once the glue has cured.
Stormsure Flexible Repair Adhesive bonds to virtually all surfaces including neoprene, rubber, leather, PVC, polyurethane, breathable and coated fabrics, wood, metal and more. It is ideal for repairing cracks in rubber wellington boots, hiking boots, loose soles, leaks in waders, rips in wetsuits, damaged horse rugs, holes in tents and canopies, leaks and splits inflatable items and many other items too. It can also be used for repairs to woodwork and furniture, roof tiles and concrete.
A tube of Stormsure Flexible Repair Adhesive is an essential part of a repair kit for hikers, DIY, fishermen, equestrians, hunters, divers, campers, surfers, sailors, engineers etc!
Comes with disposable gloves.
Use the adhesive at room temperature. Clean the damaged area to remove dirt and grease (sandpaper the surface for best adhesion). Apply a generous amount of Stormsure Flexible Repair Adhesive to the damaged area, with at least a 5mm extra around the damaged area. Leave horizontal and allow to cure for 10-12 hours.
Mix with Stormcure Accelerator to reduce cure time to approximately 1 hour. Ensure there is no air left in the tube before replacing cap.
Store partly-used tubes in a deep freezer.