Underquilt Buckles – Ungaper Underquilt Buckles | Lesovik

Underquilt Buckles – Ungaper Underquilt Buckles Lesovik

The underquilt often becomes too loose at the ends of the hammock. To address this issue, Lesovik has developed a small accessory that makes a significant difference in the installation of the underquilt. With this simple and ingenious buckle set, you can lift the edges of the underquilt high enough so that the end of the underquilt runs neatly against the hammock fabric. By adjusting the position of the buckle, you can determine how much the underquilt rises.

The buckle set can be used with all underquilt models that are attached with elastic bands at the ends.

Description

• Accessory for attaching the underquilt’s elastic bands.
• Lifts the underquilt upwards, improving its fit.
• Suitable for ⌀ 2.5-3 mm elastic bands.
• Installation does not require sewing.
• The set of two pieces weighs only 6 grams.

Easy to install – no sewing required!

Note: Check the thickness of your underquilt’s elastic bands, which must be 2.5-3 mm.

Usage

1. Remove the elastic bands from your underquilt and any existing buckles.
2. Thread the elastic bands through the holes in the buckle as shown in the picture.
3. Reattach the elastic bands to the underquilt.
4. Attach the underquilt to the hammock ropes with a carabiner (not included).
5. Lift the elastic bands from the sides over the top of the hammock and close the buckle.
6. Adjust the buckle so that the position of the underquilt is to your liking.

Material: 100% acetal, recycled pre-consumer waste.

Product includes: two white buckles to connect the elastic bands.