Mosquito Net for hammock Vagabond Bug Net | Bushmen

The mosquito net has 3 holes with welts.

The main hole – entrance.

When entering the hammock or lying on the mattress you can close the entrance hole with a welt tightly around the sides of the hammock or mattress.

In that way, you will create effective protection against mosquitoes.

The nylon hem prevents trash from sticking and significantly increases the durability of the mosquito net.

The other two openings are at the top of the mosquito net.
They are used to set up the attached ridgeline and the ropes for hanging the hammock.
Ridgeline is a string with adjustable tension on which the mosquito net is hung, it makes the ridge of the roof.
The ridgeline has a unique system of adjusting it after entering the hammock.
You can perfectly tighten it so that the mosquito net is as high as possible.

Both entry and exit are very easy. Release the puller and lift the mosquito net up.

1. set-up the ridgeline between the hammock carabiners.
2. Pass the ridgeline and the hammock rope through the holes at the top of the mosquito.
3. Attach the ends of the mosquito net to the carabiner and close the holes by welts.

Done – we enter / exit the hammock by loosening the welt and lifting the mosquito net.

Set-up the ridgeline mosquito net between the poles, about 60 cm high (+/- at knee height) (under the tarp if we use it)

Pull the apron of the mosquito net tightly around the mattress so that the apron is at the bottom of the mattress.

Done – go in / out under the mosquito net by loosening the welt and lifting the mosquito net.